Socio-Technical Learning System at the Workplace

Enhancement of Employee Competence through Socio-Technical Assistance Systems for Flexible Use at the Workplace

JournalIndustrie 4.0 Management
Issue Volume 37, 2021, Edition 6, Pages 47-51
Open Accesshttps://doi.org/10.30844/I40M_21-6_S47-51
Bibliography Share Cite Download

Abstract

The complexity of manual activities in different areas of a company is increasing due to smaller batch sizes, higher product variants and shorter product life cycles. The balanced provision of information ensures shorter training times, higher acceptance among employees and can be used directly at the workplace. For system implementation, organizational factors must also be considered in accordance of a socio-technical system design.

Keywords


Bibliography

[1] Ulich, E.: Arbeitssysteme als Soziotechnische Systeme − Eine Erinnerung. In: Journal Psychologie des Alltagshan- delns 6 (2013) 1, S. 4-12.
[2] Grote, G.: Autonomie und Kontrolle. Zur Gestaltung automatisierter und risikoreicher Arbeitssysteme. In: Ulich, E. (Hrsg): Schriftenreihe Mensch, Technik, Organisati- on. Band 16. Zürich 1997.
[3] Grote, G.; Wäfler, T.; Ryser, C.; Weik, S.; Zölch, M.; Windischer, A.: Wie sich Mensch und Technik sinnvoll ergänzen. Die Analyse automatisierter Produktionssysteme mit KOMPASS. In: Ulich, E. (Hrsg): Schriftenreihe Mensch, Tech- nik, Organisation. Band 19. Zürich 1999.
[4] Emery, F. E.: Characteristics of socio-technical systems. In: Tavistock Institute of Human Relations. Document No. 527. London 1959.
[5] Emery, F. E.; Trist, E. L.: Socio-technical systems. In: Churchman, C. W.; Verhulst, M. (Hrsg): Management science, models and techniques 2 (1960).
[6] Trist, E. L.: The evolution of sociotechnical systems. A conceptual framework and an action research program. In: Issues in the quality of working life, Occasional Papers No. 2. Toronto (Kanada) 1981.
[7] Friesling, E.: Arbeitsanalyse und Arbeitsgestaltung. In: Hoyos, C. G.; Frey, D. (Hrsg): Arbeits- und Organisationspsychologie. Ein Lehrbuch (1999).
[8] Oesterreich, R.: Konzepte zu Arbeitsbedingungen und Gesundheit – Fünf Erklärungsmodelle im Vergleich. In: Oesterreich, R.; Volpert, W. (Hrsg): Psychologie gesundheitsge- rechter Arbeitsbedingungen, Band 59 (1999).
[9] Hermann, T.: Kreatives Prozessdesign. Konzepte und Methoden zur Integration von Prozessorganisation, Technik und Arbeitsgestaltung. Berlin Heidelberg 2012.
[10] Adler, P.; Dander, H.: Digitale Unterstützung beim Lernen am manuellen Arbeitsplatz. In: Betriebspraxis & Arbeitsforschung. Zeitschrift für ange- wandte Arbeitswissenschaft 237 (2019), S. 24-31.
[11] Csikszentmihalyi, M.: Flow. The psychology of optimal experience. North Charleston, South Carolina (USA) 2018.
[12] REFA – Verband für Arbeitsstudien und Betriebsorganisation: Datenermittlung. Methodenlehre der Betriebsorganisation. München 1997.
[13] Bokranz, R.; Landau, K.: Produktionsmanagement von Arbeitssystemen. MTM-Handbuch. Stuttgart 2006.
[14] Wright, T. P.: Factors Affecting the Cost of Airplanes. In: Journal of the Aeronautical Sciences 3 (1936), S. 122-128.
[15] Dander, H.: Interaktives und wissensbasiertes Informationssystem für manuelle Tätigkeiten. Dissertation. In: Berichte aus dem Maschinenbau. Aachen 2018.
[16] de Greiff, M.: Die Prognose von Lernkurven in der manuellen Montage unter besonderer Berücksichtigung der Lernkurven von Grundbewegungen. Dissertation. In: Fortschritt-Berichte VDI, Reihe 2, Fertigungstechnik, 592. Düsseldorf 2001.

Your downloads


You might also be interested in

MAKI—A Digital Assistant for Practice-Based Learning

MAKI—A Digital Assistant for Practice-Based Learning

Why every factory is a learning factory
Olaf Resch ORCID Icon
With the help of digital assistants, academic teaching is possible in any factory. In order to achieve the best learning effects, however, the interests of all stakeholders must be taken into account. The factory wishes to deploy its employees quickly and productively, the learners desire a positive learning experience, and the educators want to illustrate abstract concepts in a meaningful and practical way. The only way to combine all of these perspectives is via a well-thought-out educational concept and highly functioning technology.
Industry 4.0 Science | Volume 42 | 2026 | Edition 2 | Pages 70-77
Serious Gaming and the Energy Transition

Serious Gaming and the Energy Transition

Collaborative knowledge generation and interactive understanding of complex interrelationships
Janine Gondolf ORCID Icon, Gert Mehlmann, Jörn Hartung, Bernd Schweinshaut, Anne Bauer
Conveying the complexity and multifaceted nature of the energy transition to a broad audience is a challenge. This article demonstrates how interactive serious games on a multitouch table can help make connections tangible and comprehensible. The games and the table were used in various conversational contexts. These are presented here in three case vignettes based on participant observation of the different applications, as well as situated and shared reflection. The vignettes demonstrate how interaction can trigger epistemic processes, enable shifts in perspective, and foster collective thinking, all of which are necessary for shaping the future of society as a whole.
Industry 4.0 Science | Volume 42 | 2026 | Edition 2 | Pages 62-69
Industrial Transformation via a Machining Learning Factory

Industrial Transformation via a Machining Learning Factory

A learning module to foster competencies for a sustainability-driven transformation
Oskay Ozen ORCID Icon, Victoria Breidling ORCID Icon, Stefan Seyfried ORCID Icon, Matthias Weigold
Sustainability-enhancing transformation processes are necessary in all sectors if we are to remain within planetary boundaries. This also applies to the industrial sector as a significant emitter of greenhouse gases. Employees need new competencies to master this complex task of industrial transformation. These range from CO2 equivalents accounting to the development and evaluation of transformation scenarios, including technical measures. The learning module developed here addresses these competency requirements and uses the example of the ETA factory to show how a competency-oriented learning module for industrial transformation can be structured. It essentially comprises four phases: data collection and CO2 equivalents accounting, cause analysis, development of measures and evaluation of measures.
Industry 4.0 Science | Volume 42 | Edition 2 | Pages 38-47 | DOI 10.30844/I4SE.26.2.38
Data Quality and Domain Expertise for Resilient AI Deployment

Data Quality and Domain Expertise for Resilient AI Deployment

Integrating anomaly and label error detection in industry
Pavlos Rath-Manakidis, Henry Huick, Erdi Ünal, Björn Krämer ORCID Icon, Laurenz Wiskott ORCID Icon
AI implementation transforms work and worker-technology relationships in industrial quality control. This paper explores how approaches to data quality and model transparency support ethical AI deployment, fostering worker agency, trust, and sustainable work design in automatic surface inspection systems (ASIS). Recurring problems like data inefficiency, variable model confidence, and limited AI expertise point to key challenges of human-centered AI: user trust, agency and responsible data management. A solution co-developed with an ASIS supplier demonstrates that the challenges extend beyond the purely technical, underscoring the value of AI design that augments human capabilities. Technical solutions such as anomaly, label error, and domain drift detection are proposed to enhance data quality and model reliability. The insights emphasize the following generalizable strategies for resilient AI integration: understanding user-reported problems through a human-AI interaction lens, ...
Industry 4.0 Science | Volume 42 | Edition 1 | Pages 128-135 | DOI 10.30844/I4SE.26.1.120
Digital Competence Lab (DCL) for Speech Therapy

Digital Competence Lab (DCL) for Speech Therapy

Designing a learning platform to advance digital skills
Anika Thurmann ORCID Icon, Antonia Weirich ORCID Icon, Kerstin Bilda, Fiona Dörr ORCID Icon, Lars Tönges ORCID Icon
The digital transformation of healthcare results in lasting changes in speech therapy. Smart technologies and artificial intelligence (AI) are creating new opportunities to ensure therapy quality, address care bottlenecks, and actively involve patients in exercise processes. At the same time, these developments are expanding the role of speech therapists, who increasingly use digital systems as supportive tools in addition to their core therapeutic tasks. Based on a feasibility study of the AI-supported application ISi-Speech-Sprechen in a real-world setting of complex Parkinson's therapy (PKT), this article outlines the key challenges associated with implementing smart technologies.
Industry 4.0 Science | Volume 42 | 2026 | Edition 1 | Pages 110-118 | DOI 10.30844/I4SE.26.1.102
AI Skills for Responsible Use

AI Skills for Responsible Use

Realistic learning environments, critical thinking, and role design in teams
Valentin Langholf ORCID Icon, Niklas Obermann ORCID Icon, Uta Wilkens ORCID Icon, Marco Kuhnke, Michael Prüfer
Artificial intelligence (AI) is changing the world of work. But how can work teams learn to use AI support in a way that delivers speed advantages and ensures consistently high quality? One possible approach is to test it in a workplace-like simulation. Trying it out under realistic conditions shows the role that critical thinking plays.
Industry 4.0 Science | Volume 42 | Edition 1 | Pages 100-107 | DOI 10.30844/I4SE.26.1.92